Abstract
La 0.60R 0.20Mg 0.20(NiCoMnAl) 3.5 (R = La, Ce, Pr, Nd) alloys were prepared by inductive melting. Variations in phase structure and electrochemical properties due to partial replacement of La by Ce, Pr and Nd, were investigated. The alloys consist mainly of LaNi 5 phase, La 2Ni 7 phase and LaNi 3 phase as explored by XRD and SEM. The maximum discharge capacity decreases with Ce, Pr and Nd substitution for La. However, the cycling stability is improved by substituting Pr and Nd at La sites, capacity retention rate at the 100th cycle increases by 13.4% for the Nd-substituted alloy. The electrochemical kinetics measurements show that Ce and Pr substitution improves kinetics and thus ameliorates the high rate dischargeability (HRD) and low temperature dischargeability. The HRD at 1200 mA g −1 increases from 22.1% to 61.3% and the capacity at 233 K mounts up from 90 mAh g −1 to 220 mAh g −1 for the Ce-substituted alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.