Abstract
Abstract The influence of radial neutron reflector on the build-up and propagation of a nuclear fuel burn-up wave in a fast multiplying medium is investigated using a consistent parametric approach. Coupled multigroup neutron diffusion equations with a burn-up evolution model are simulated on the two-dimensional cylindrical reactor geometry with azimuthal symmetry. Uranium–plutonium transmutation model is considered, and the simulation is performed by using the finite element multiphysics software package comsol. Transient characteristics of the burn-up wave are represented by two new parameters, namely, transient time (TT) and transient length (TL). TT and TL are defined as the time and distance required for the burn-up wave to attain its steady-state nature. Steady-state phases are characterized in terms of wave velocity, full width half maximum (FWHM), and full width 10% of maximum (FW10M). A sensitivity study of steady-state and transient parameters is conducted for the different values of radial reflector thickness. The potential relevance of these characterization parameters on the development of optimal geometrical configuration of radial neutron reflector in breed and burn (B&B)-based reactor design is addressed based on the sensitivity study.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have