Abstract
Porous Si3N4 ceramics were produced by the initial Si3N4 powder added different amounts of β-Si3N4 powder. The density, porosity and flexural strength were tested by the methods of Archimedes method and three-point bending measurements, respectively. Phase composition and microstructure of Si3N4 ceramics were studied by X-ray diffraction and scanning electron microscopy. Fibrous β-Si3N4 grains developed in the porous microstructure. The grain morphology and size were affected by adding different amounts of β-Si3N4 powder. Fibrous β-Si3N4 grains dispersed in the porous Si3N4 ceramics uniformly with the length of 4∼10μm, the average diameter of 0.6μm and average aspect ratio of 7 were obtained. Adding 3 mass% β-Si3N4 powder, porous Si3N4 ceramics with excellent properties were prepared.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
