Abstract
Waste waterglass foundry sand (WwFS) is a solid waste generated by the foundry industries that is commonly discarded in landfills and has urgent needs for disposal and recycling. Accordingly, this study suggests using WwFS as aggregates source for the preparation of alkali-activated slag mortars (AASM). Two different pre-wetting methods (24 h pre-wetting at 20°C and 1~6 h pre-wetting at 70°C) were used to treat WwFS and compared their performances with adding quartz sand and dried WwFS mortars. Compared to WwFS mortars without pre-wetting treatment, the compressive strengths of WwFS mortars containing WwFS pre-wetting in water at 70°C at 28d were increased by 1.3~10.0%, and the C-(A)-S-H average elastic modulus was increased by 16%. This study confirmed the feasibility of using hot water pre-wetted WwFS as the single aggregate source for AASM, which is important for the large-scale utilization of WwFS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
