Effect of Pre-Soaking Treatment Method of Plant-Based Aggregate on the Properties of Lightweight Concrete—Preliminary Study

Abstract

This research investigates the effect of pre-soaking treatment on plant-based aggregate using a wet grout binder to formulate a high-strength lightweight concrete (HSLWC). Surface modification utilising a novel grout soaking technique with various water-to-cement (w/c) ratios has indicated a new method of approach for the recent development of lightweight plant-based aggregate (LWPA). In this experiment, the fresh and hardened properties of modified LWPA lightweight concrete were assessed by verifying their workability, densities, compressive and split tensile strengths towards the modulus of elasticity. The results showed that pre-soaking plant-based lightweight aggregate (w/c: 0.6, 0.8, 1.0 and 1.2) slightly increased the density of the samples compared to untreated LWPA. The oven-dry density of treated and untreated LWPA is controlled in the range of HSLWC. The outcomes indicated that the workability of the surface-modified LWPA is significantly improved: up to 40% in 6 min for the (TDS)/0.6 sample compared to the original LWPA. The mechanical properties of the LWPA concrete with the surface modification method exhibit a substantial increment of compressive strength, split tensile strength and the modulus of elasticity; recorded at 22%, 26% and 34%, respectively. Significantly, the findings from this experiment reveal that the pre-soaking treatment method on LWPA is shown to be a highly recommended technique in improving interfacial bonding while maintaining its performance as one of the most promising solutions to improve the properties of lightweight concrete.