Abstract
Praseodymium salt was used as additives for the first time in preparing anodic aluminum oxide (AAO) films to improve its performance. AAO films were prepared by anodization method from a 15 vol.% sulphuric acid solution containing praseodymium salt. The effects of Pr concentration on microhardness and thickness of AAO film were investigated, respectively. The effect of heat treatment temperature on structure of AAO film was investigated. AAO films were characterized by XRD, EDAX and SEM techniques. AAO films showed higher microhardness and thickness, the surface of AAO film was smoother and the aperture of AAO film was more uniform than those of films prepared in 15 vol. % sulphuric acid anodization solution. The microhardness and thickness of AAO film were 355.7HV and 84μm respectively. The apertures of AAO film were in 25～30nm. There was not praseodymium in AAO film. AAO films were amorphous when heat treatment temperatures of AAO film were below 800°C. When heat treatment temperature of AAO film were 850°C and 1000°C respectively, AAO films were γ-Al2O3 and α-Al2O3 film respectively.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
