Effect of porous media heterogeneity and FeS re-generation for multiple cycles on arsenic immobilization under in-situ conditions

Abstract

Arsenic (As) contamination in groundwater is a well-established concern. Several studies have explored the possibility of immobilizing arsenite [As (III)] in-situ within the aquifer. Recent studies show a uniform distribution of ferrous sulfate (FeS) synthesized within homogenous porous media and demonstrated promising performance in immobilizing As(III). Upscaling from bench-scale to field-scale systems involves the integration of physical and chemical heterogeneities. Thus, the distribution of reducing agent (i.e., FeS), subsequent capturing of As(III) in the upscaled heterogeneous porous media system is a complex and uncertain phenomenon. Therefore, this study focuses on assessing the performance of FeS when synthesized for multiple cycles under constant flow and constant head conditions for immobilization of As(III) through a heterogeneous porous media system. A 3-D heterogenous porous media system is first simulated using a sequential indicator simulator model (SISIM). Then, the same heterogeneous media is prepared in the laboratory by packing three different-sized sand within a 3-D tank (0.67 m × 0.40 m × 0.40 m) which is subdivided into a total of 150 grids (0.096 m × 0.08 m × 0.08 m). FeS is synthesized in-situ by sequential injection of sodium sulfide (Na2S) and ferrous sulfate (FeSO4‧6H2O), as detailed in the previous study. The outcome of the study suggests that flow within the model subsurface porous media is non-uniform and follows an inter-connected preferential flow path. The progression of in-situ synthesized FeS is faster in the areas of higher hydraulic conductivity. The immobilization of As (88%) is promising by FeS synthesized within heterogeneous porous media. An overall reduction of porosity (7.7%) and hydraulic conductivity (68.3%) are observed, which is more predominant along the preferential flow path where deposition of FeS is significantly higher. To maintain constant flow rate, 60% increase in head difference is required. Whereas the flow rate decreases by 47.2% when constant head condition is adopted. Overall, the newly synthesized FeS shows promising performance in immobilizing As(III) within heterogeneous model subsurface porous media; however, there might be some possibility of pore-clogging and bypassing of flow due to deposition and subsequent retention of As, which may impact the As removal efficiency in the longer run.