Abstract
Poly(lactic acid) (PLA) was blended with poly(ethylene oxide) (PEO) with four different molecular weights of 1 × 105, 2 × 105, 3 × 105, and 4 × 105 g/mol to improve the flexibility of PLA. The blends were compounded in an internal mixer at 190 °C with 50 rpm for 15 minutes and using a hot press to mold rectangular sample sheets. The mechanical properties of PLA blends were analyzed to prove the ductility. Additionally, phase morphologies of blends were investigated by using tensile fracture surface. The addition of PEO into PLA matrix leads to slight increase in tensile strength, while the elongation at break was decreased by increasing the molecular weight of PEO. However, the elongation at break of PLA/PEO blends was higher than the one of neat PLA. In other words, PEO enhanced the flexibility of PLA blends, according to scanning electron microscope images. In brief, PLA-based blends greatly increased in ductility.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
