Abstract
AbstractIn this paper, the effect of plasma electrolytic oxidation (PEO) on the hot salt corrosion fatigue (HSCF) behavior of the TC17 titanium alloy at 420°C was investigated. Through microstructure characterization and fatigue fracture analysis, combined with a comparative study of its hot salt corrosion behavior, the mechanism of PEO on HSCF behavior was also investigated. The results showed that the high‐temperature fatigue resistance of the TC17 titanium alloy was significantly reduced by the deposition of 0.4 mg/cm2 of solid NaCl compared with that without a salt coating. This behavior was observed because the corrosion pits caused by hot salt corrosion promoted the initiation of fatigue cracks, and hydrogen penetration promoted the growth of fatigue cracks. However, the HSCF resistance of the TC17 alloy with the PEO ceramic coating could be effectively increased. This was because the PEO ceramic coating with high bonding strength and good compactness effectively inhibited hot salt corrosion damage and delayed the formation of the resident slip zone and hydrogen permeation, thereby inhibiting the initiation and propagation of fatigue cracks.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.