Abstract
It is commonplace in industrial installations to have different piping arrangements for the efficient transport of substances/materials. However, the processing industry has raised some major concerns in terms of safety, due to the accidental gas explosions that have occurred frequently and caused serious damage. It is the aim of this study to comprehensively analyse the governing factors involved in flame propagation inside different pipe configurations. This research investigates confined pipe explosions using straight, 90-degree bending, and tee-junction pipes with different obstacle placements. Hydrogen-, ethylene-, propane- and natural gas–air mixtures, over a range of concentrations (equivalence ratio, Ф = 0.6–1.4) have been used. The results show that, while there is no significant difference in the maximum pressure and rate of pressure rise in both tee-pipe arrangements investigated, the bending pipe consistently produces the worst set of results in terms of maximum pressure and flame speed in gas explosions, involving the most reactive mixtures. In addition, the detailed records of pressure traces and blast waves show that the duration of flame acceleration, the flame direction and the initial ignition point depend on the tee junction placement along the pipe length, resulting to different overall profile of the flame acceleration mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Loss Prevention in the Process Industries
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.