Abstract
AbstractAg electrodes with line width uniformity for large‐sized plasma display panels were successfully fabricated through a photolithographic process using photosensitive Ag pastes with optimized photosensitive properties. The photosensitivity of the Ag electrode pastes in the photolithographic process was investigated as a function of the types and contents of photoinitiators, the molecular weights and acid values of acrylic binders with carboxylic acid groups, and the process variables, such as the UV‐light intensity and dose, with a step tablet. This study revealed that the photoinitiator was a major parameter for the photosensitivity of the Ag electrode pastes. With the photosensitivity of the photosensitive Ag electrode pastes optimized by the study of the photoinitiator contents, Ag electrodes with line width uniformity were achieved with an HSP‐188 photoinitiator content of 15 wt % on the basis of the reactive monomers, regardless of the variation of the light dose from 250 to 350 mJ/cm2 and intensity from 15 to 25 mW/cm2. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call