Abstract
AbstractMulti‐walled carbon nanotube (MWCNT)‐ and graphene nanoplatelet (GNP)‐filled high‐density polyethylene (HDPE) composites with dispersed and segregated network structures were prepared by solution‐assisted mixing. Simultaneous DC conductivity and differential scanning calorimetry were used to measure electrical conductivity during composite thermal phase transitions. It was found that the conductive network is deformed during melting and rebuilt again during annealing due to the re‐agglomeration of nanofillers. The rebuilding of the structure is significantly affected by the original network structure and by the shape and loading of the nanofillers. Both deformation and reorganization of the network lead to drastic changes in the conductivity of the composites. The crystallization process also affects the conductive network to some extent and the subsequent volume shrinkage of the polymeric matrix after crystallization results in a further decrease in the resistivity of HDPE/GNP composites. Classical electrical percolation theory combined with a kinetic equation is used to describe the conductivity recovery of composites during annealing, and the results are found to be in good agreement with experimental data. © 2017 Society of Chemical Industry
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
