Abstract
AbstractIn the present study, aluminium alloy (A380) composites containing 3, 6, 9 and 12 weight percentage of fly ash particles were fabricated by liquid metallurgy technique. Three different size ranges of fly ash particles (50–75 μm, 75–103 μm and 103–150 μm) were used. The composites were evaluated for hardness, tensile strength, density, dry sliding wear and frictional behaviour. Pin-on disc apparatus was used to conduct wear tests at loads of 20, 30 and 40 N at a sliding speed of 3 m/s for a constant period of 10 min. Results showed that hardness, ultimate tensile strength, wear resistance and coefficient of friction were superior in composites reinforced with coarse fly ash particles (103–150 μm) compared to composites with fine particles. The hardness, ultimate tensile strength and wear resistance increased, whereas the coefficient of friction and density decreased with the increase in weight percentage of fly ash. Wear resistance and coefficient of friction decreased with increase in applied load. Scanning electron microscope investigations of worn-out samples were carried out to study the progress of wear.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
