Abstract
The paper reports the effects of fly ash particle size on the properties of the lightweight insulation materials. The microstructure and mechanical properties of lightweight insulation materials are separately investigated by SEM (scanning electron micrograph) and tabulate thermal conductivity apparatus methods. In addition, the effects of particle size distribution of fly ash on the properties of lightweight insulation materials is studied by grey incidence analysis. The results show that when the ball milling time increases, the particle size of fly ash decreases and the distribution becomes narrow. At the same time, the polymerization state of fly ash would be depolymerize from high poly structure to low polymeric structure. Moreover, the linear shrinkage, bulk density, compressive strength, acid resistance and thermal conductivity of lightweight insulation materials have also increased, but the apparent porosity decreases. And the studies highlight that when the content of fine fly ash particles increases, the nucleation and growth of mullite is accelerated and the sintering driving force is improved at high temperature, which have a positive effect on improving the physicochemical properties of materials. The particles ranging from 20 to 30μm has a great influence on the linear shrinkage, bulk density, compressive strength, acid resistance rate and thermal conductivity of lightweight insulation materials.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call