Abstract

The theoretical drift velocity of a randomly oriented nonspherical aerosol particles in an external field has been previously computed both in the limit of slow rotation and in the limit of fast rotation but not in the intermediate interval. The low rotation limit has been widely used to calculate the drift velocity for a range of nonspherical particles. The fast rotation limit, which is equivalent to the projected area method, has been used for molecular ions and agglomerates. A 1-D model equation containing the particle acceleration and an orientation dependent friction coefficient is proposed to predict the drift velocity between the two limits. This model has the essential physical phenomena without the complications of the 3-D treatment of the combined translation and rotation behavior. As an example, the drift velocity is computed for model parameters based on the friction tensor and rotational diffusion coefficient for circular cross section nanorods in the free molecular limit. For a momentum accommodation coefficient of 0.9 and a particle density of 1000kg/m3, the largest percent deviation from the low rotation velocity limit is 14% and the deviation is at most 1% for nanorods of any length for diameters of 20nm diameter or larger. Much larger changes in the velocity ratio are shown to occur if the momentum accommodation coefficient is reduced. Also, examples are given where the dimensionless rotation rate increases by about a factor of 7 from either a change in density or a change in the mean free path of the background gas. The results of recent experiments and model calculation of the collision cross section and mobilities of large molecular ions are discussed in regard to our model predictions on the effect of rotation on the drift velocity.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.