Abstract
Abstract In this study, Hardox 450 and HiTuf steels were boronized by pack-boriding method at 800, 900, and 1000∘C for 5 h. The phases, microstructure, hardness, and wear behavior of boride layers formed on the surface of samples were investigated using XRD, SEM, Micro-Vickers hardness testers, and a pin-on-disc tribotester, respectively. XRD analysis showed that both FeB and Fe2B phases were formed in the borided area of Hardox 450 steel, but only Fe2B phase occurred in the boride layer of the HiTuf steel. Micro-Vickers hardness results indicated that the hardness values of the boride layer decreased from the column-shaped structure to towards the matrix in both of Hardox 450 and HiTuf steels. Furthermore, the wear test results showed the coefficients of friction (COF) decreased significantly in the borided samples. The COF of the unborided Hardox 450 steel was reduced considerably from 0.29 to 0.02 by boriding treatment. Similarly, the COF of unborided HiTuf steel was significantly diminished from 0.16 to 0.04 by boriding treatment. In conclusion, the results of this study have indicated that the wear resistance of Hardox 450 and HiTuf steels can be improved by pack-boriding.
Highlights
Hardox steels are generally classified as low alloy steels containing low amounts of boron
XRD analysis showed that both FeB and Fe2B phases were formed in the borided area of Hardox 450 steel, but only Fe2B phase occurred in the boride layer of the HiTuf steel
In this study, we aim to investigate the effect of boriding temperature on the structure, hardness, friction, and wear behavior at room temperature (25∘C) conditions of the boride layer formed on the surface of Hardox 450 and HiTuf steels
Summary
Hardox steels are generally classified as low alloy steels containing low amounts of boron. The boriding process is a chemical heat treatment that aims to diffuse boron atoms to the sample surface and forms borides with base metal [12,13,14,15].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have