Abstract
The aim of present work is to bridge the gap of knowledge concerning crystallite size, graphene layers curvature and inter-layer distance as nanostructure characteristics of soot primary particles, and also to comprehensively characterize the morphology of soot emission in a light hydrocarbon premixed charge compression ignition (PCCI) engine. In this study, the chemical composition, morphology and nano-structure of particulate emissions between conventional diesel and light hydrocarbon PCCI engine were performed with thermogravimetric analysis, gas chromatography mass spectrometry, and high-resolution transmission electron microscopy technology. The results show that the volatile matter content of light hydrocarbon is much higher than that of diesel, and thermogravimetry and differential thermogravimetry curves of light hydrocarbon shift to low temperature regions. The total organic components of particulate matter of light hydrocarbon PCCI engine are less, and the corresponding separation time is shorter. The structure of particles produced in light hydrocarbon PCCI engine is more open, and the size of aggregates is smaller. Fractal dimensions of 1.774 and 1.691 are obtained for soot particles in light hydrocarbon PCCI engine, compared to that of 1.81 and 1.785 in conventional diesel engine. Compared to conventional diesel engine, fringe separation distance and fringe tortuosity in light hydrocarbon PCCI engine are smaller while fringe length is larger. The primary particle nanostructures of light hydrocarbon PCCI engine incline to graphitize and change into the orderly structure. Compared with conventional diesel combustion, the average primary particle diameter of light hydrocarbon PCCI approximately reduces 2.0% at 75% load and 18.2% at 100% load, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
