Abstract
The oil-wet state of carbonate reservoirs presents a serious challenge for oil recovery. While cationic surfactants are able to reverse the wettability, their efficiency depends on the oil composition, particularly on the carboxylates as the main surface-active compounds. In this study, calcite surface was aged by two distinct carboxylates: a shorter, less hydrophobic octanoate and a more hydrophobic stearate. The surface wettability and its reversal by a quaternary ammonium cationic surfactant were studied both experimentally by contact angle measurements and Scanning Electron Microscopy (SEM) imaging, and by molecular dynamics (MD) simulations. Both simulations and experiments show that aging with the more hydrophobic stearates yields more strongly oil-wet surfaces, whose wettability is more difficult to reverse by the cationic surfactant, than aging with octanoates. While the surfactant ultimately reverses the wettability in both cases, significantly higher surfactant concentration is required for the stearate-aged calcite. The difference in the wettability can be rationalized by the greater hydrophobicity of the stearate, which strengthens both the surface adsorption and attraction of the non-polar oil phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.