Performance and compensation method of first-order liquid crystal beam-steering system under continuous wave laser irradiation

Abstract

The effects of laser irradiation thermal deposition on the performance degradation of liquid crystal (LC) devices in high-power laser systems are extremely vital. In this study, the first-order beam-steering system (FBS) was developed using a passive liquid crystal polarization grating (LCPG) and liquid crystal adjustable wave-plate (LCAW). The LCPG was prepared by holographic exposure technology, and the LCAW was prepared using the standard LC cell preparation process. We investigated the influences of diffraction efficiency of FBS under a 1070-nm continuous-wave (CW) laser irradiation. The energy is concentrated in the −1st order at first. When the half-wave retardation was reached, all the energy is concentrated in the +1st order (∼97 %), and the beam is deflected. Once the phase retardation decreases below the half-wave retardation, the energy gradually reconcentrates in the −1st order. When the LCAW fails, the diffraction the energy is refocused to the −1st order by the LCPG. The results indicated that both thermal deposition and driving voltage reduce the phase retardation of the LCAW, generating a variation of energy between in ±1st orders. By reducing the driving voltage, this half-wave retardation can be recovered under a certain half-wave voltage and laser power density, and the diffraction efficiency of the +1st order can be compensated to ∼97 %. If the reduced phase retardation is not less than half-wave, the FBS can still be modulated in high-power continuous lasers. Our research provides a reference for the development of beam-steering technology based on LC materials in high-power laser systems.