Abstract
Biodiesel has a high viscosity, which limits its application to engines. However, n-pentanol has low viscosity and high volatility, which is considered a promising additive. This study examined the influence of n-pentanol/biodiesel/diesel blends on the performance and particulate emissions of a diesel engine at different loads, under the condition of coupling exhaust gas recirculation (EGR) (0–30%). The three test fuels included pure diesel (D100); 80% diesel and 20% biodiesel blended fuel (BD20); 64% diesel, 16% biodiesel, and 20% n-pentanol blended fuel (BDP20). The results indicated that the influence of EGR on the NOx emissions between fuels was greater than that of the physicochemical properties of the fuels. For the same EGR rate, the heat release rate (HRR), peak in-cylinder pressure (IP), and brake thermal efficiency (BTE) increased with the engine load increased. After adding n-pentanol to BD20, the HRR increased. The peak IP and BTE values of BDP20 were similar to those of D100 and BD20. With the addition of n-pentanol, the total particulate number concentration (TPNC), soot, and total particulate mass concentration (TPMC) emissions decreased. Furthermore, the trade-off relationship between TPMC and NOx was improved, and the geometric mean diameter (GMD) of the particles decreased.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
