Abstract
Austenitic stainless steel or high nitrogen austenitic steel are used extensively as structural non-magnetic materials. The former, because of their low surface hardness, have low wear resistance. Recently developed plasma (ion)-carburizing improves the surface of austenitic stainless steel by removing the oxide scale. In contrast, high nitrogen austenitic stainless steel are expected as wear-resistance material because the hardness is higher than that of conventional austenitic stainless steel.In this study, two kinds of austenitic stainless steel were plasma (ion)-carburized in an atmosphere of CH4+H2 plasma at 1303 K for 14.4 ks. The metallurgical characteristics were then investigated using XRD (X-ray diffraction method), OM (optical microscopy), hardness testing, glow discharge optical emission spectroscopy (GDOES) and a scanning electron microscopy (SEM).The results show that the plasma (ion)-carburized low nitrogen austenitic stainless steel had the layer with structure similar to the common austenitic stainless steel. The plasma (ion)-carburized high nitrogen austenitic stainless steel had the carbide layer at the top surface, carbide dispersed layer in the matrix, and then lamellar structure of carbides toward the inner layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
