Abstract
This research studied the fabrication of bismuth-sodium-titanate (BNT) powders and the effect of Nb2O5 addition on the structure and the properties of BNT ceramics. The powders were synthesized via high-energy ball milling by using a mixed-oxide process. The results show that the perovskite structure was obtained in BNT powders at a calcination temperature of 800 °C. Particle sizes below 200 nm were observed. For the study, BNT/xNb ceramics were prepared using x = 0.01, 0.02, 0.03 and 0.05. The ceramics were sintered at a temperature of 1200 °C for 2 hours. The results showed that the relative density increased with increasing Nb2O5 from 0 to 0.03 whereas the grain size decreased with increasing Nb2O5 from 0.01 to 0.05. In addition, the dielectric constant increased with increasing Nb2O5 content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have