Abstract
ABSTRACT The standards of the materials used in a building’s construction greatly influence its strength and durability. In Nigeria, hollow sandcrete block is the most common material used in buildings. This study evaluates the effect of the water-cement ratio and then the aggregate-cement ratio (mix ratio) on the compressive strength and density of hollow sandcrete blocks of size 9" (225 X 225 X 245mm). Six water–cement ratios (0.35, 0.40, 0.45, 0.50, 0.55 and 0.60) and five mix ratios (1:6, 1:7, 1:8, 1:9 and 1:10) were used and the compressive strength and density of the blocks were determined. The results were checked for compliance with the Nigerian Industrial Standard (NIS) (2004) and BS 2028 (1983). The results revealed that 0.45 is the optimum water-cement ratio with the highest compressive strength value of 3.34 N/mm2. Furthermore, the 28-days compressive strengths of the 1:6, 1:7, 1:8, 1:9 and 1:10 were found to be 2.88 N/mm2, 2.85N/mm2, 2.71N/mm2, 2.49N/mm2 and 2.46 N/mm2 respectively. The study samples have a density range of 1527kg/mm3 to 1815kg/mm3 meeting the minimum requirement of 1500kg/mm3 by BS 2028 (1983). For commercial purposes mix ratios of 1:8 and below should be used because they meet the minimum requirement of 2.5N/mm2 compressive strength specified by NIS (2004).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
