Abstract

In order to improve the electrochemical performances of La–Mg–Ni system (A 2B 7-type) alloy electrodes, the effects of La/Mg ratio on structures and electrochemical performances of the alloys were investigated in detail. From the XRD analyses, each alloy is composed of the LaNi 5, (La, Mg) 2Ni 7 and a few LaNi 2 phases. However, when La/Mg ratio is more than 3, the LaMg phase appears, and the amount of the LaMg phase increases with the increase of La/Mg ratio. With increasing of La/Mg ratio, the discharge capacities of the alloys decrease, the HRD 900 of the alloy electrodes decrease from 77.96% (La/Mg = 3) to 61.01% (La/Mg = 17/3) at the discharge rate of 900 mA g −1, charge-transfer resistance and polarization resistance of the alloy electrodes increase, the limiting current densities I L of the alloy electrodes decrease. The cycling stabilities of the alloys enhance from 55.83% (La/Mg = 3) to 67.36% (La/Mg = 17/3) with the increase of La/Mg ratio after 100 charge/discharge cycles.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.