Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg–3Gd alloy

Abstract

The effect of initial grain size on the recrystallization and recrystallization texture of a rolled Mg–3Gd (wt.%) alloy is studied in detail. The results show that the deformation microstructure of an initially coarse-grained (CG) sample has a larger twinned area and a higher density of twin boundaries than a fine-grained (FG) sample. After annealing, the CG sample recrystallizes preferentially in the twinned area, whereas the FG sample adopts the higher density grain boundaries as the nucleation sites. Furthermore, weak recrystallization texture components appear from the grain nucleation stage, regardless of the initial grain size, and are preserved after complete recrystallization due to uniform grain growth. The majority of recrystallization texture is deviated 20°–45° away from normal direction (ND), accounting for more than 50 %. Especially, the recrystallization texture of the FG sample is a “Rare Earth texture”, in contrast to the widely reported texture modification unrelated to grain boundary nucleation. Only a scattered basal texture is observed in the CG sample, which also differs from the reported “Rare Earth texture” originating from shear band nucleation in dilute Mg–Gd alloys. Finally, based on the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model, the recrystallization kinetics are calculated, and it is found that the initial grain size mainly affects the nucleation rate, and has limited effect on the grain growth rate.