Abstract

Latosol soils contaminated with chromium(VI) [Cr(VI)], which is hazardous, can be recycled as raw materials for porcelain and construction sectors if a proper thermal stabilization process is implemented. This study investigates how thermal treatment affects Cr behavior during the sintering of latosol and deorganic latosol samples; both samples are artificially contaminated with CrO3. Ap proaches including X-ray absorption spectroscopy, scanning electron microscopy, N2-based Brunauer Emmett Teller surface analyzer, thermogravimetric analyzer/differential scanning calorimeter, and the toxicity characteristic leaching procedure promulgated by Taiwan Environmental Protection Administration are used in this study. After drying the Cr(VI)-contaminated latosol (i.e., containing 37,120 mg of Cr/kg sample) at 105 °C, ∼80% of the doped CrO3 is chemically reduced to Cr(OH)3 by a humic substance naturally existing in the soil. In contrast, in the organics-free CrO3-contaminated latosol dried at 105 °C, only 9% of the doped CrO3 is reduced to Cr(OH)3. Heating the samples at 500 and 1100 °C transforms hazardous Cr(VI) into Cr(III) that is negligibly toxic; Cr2O3, which is insoluble, is detected as the most abundant Cr species. Moreover, formation of Cr2SiO5, which is suggested to relate to low Cr leaching, is only detected in the sample heated at 1100 °C. Surface morphology, surface area, and thermogravimetric analyzer/differential scanning calorimeter results demonstrate that thermal treatment at 1100 °C can incur considerable soil sintering/melting if the humic substance in the soil has been heated off previously. Finally, Cr concentrations in the toxicity characteristic leaching procedure leachates collected from the samples thermally treated at 1100 °C for 4 hr are ≤0.21 mg of Cr L−1 that are much less than the Taiwan Environmental Protection Administration regulatory limit (<5 mg of Cr L−1); consequently, these two samples are nonhazardous, and they have the potential for resource recycling. Conversely, Cr concentrations in the leachates from all 500 °C and 105 °C samples are in the 25.6–1279 mg L−1 range.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.