Abstract
This study investigated the effects of cryogenic treatment (CT) and tempering process on the mechanical properties of Ti-6Al-4V alloy. CT samples were exposed to atmosphere for various time intervals (0 h, 6 h, 24 h, 72 h) before tempering to explore the implication of temperature recovery time on overall mechanical performance. Results revealed a significant improvement in the hardness of CT samples compared to un-treated (UT). Interestingly, the hardness showed dependency on atmospheric exposure times of CT samples. The variation of Ti-6Al-4V phases generated during the cryogenic treatment was recovered as it was exposed to the atmosphere, and the degree of recovery was rather different depending on the exposure time. However, no notable differences in cross-sectional hardness and room temperature tensile properties were observed between the UT and CT samples. Hence, it was concluded that the CT only affected the surface hardness of Ti-6Al-4V alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.