Abstract
The influence of various graphene nano-platelets (GNPs) content on the tensile, flexural and Charpy impact characteristics of carbon, Kevlar and hybrid carbon/Kevlar fibers reinforced epoxy matrix composites was investigated. Both of composite configurations as carbon and Kevlar at outer and core skins were experimentally tested. The SEM images for flexural specimens were taken to observe the adhesion mechanism of GnPs particles with fiber/epoxy system. It is found that hybridization with Kevlar layers is contributed a positive effect on the hybrid carbon/Kevlar laminate structures in terms of tensile, flexural and impact behaviour. The incorporation of GnPs particles in hybrid and non-hybrid composite samples results in significant improvements in tensile, flexural and impact properties, and the greatest improvement occurs within the GnPs particle content of 0.1 and 0.25 wt%, indicating that the interfacial bonding between the matrix and the fibers is better due to the large surface area of the GnPs and the good entanglement between the GnPs layers and the matrix chains. The samples of impact test are experimented for edgewise and flatwise directions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have