Abstract
Modification of surface of natural fiber by gamma irradiation is an effective and economical technique and of viable interests in the terrain of biocomposites. The response of doses (0.5 Gy,1Gy and 2 Gy) of gamma irradiation of 6MV energy on the structural, tensile and flexural properties of composites using poly lactic acid (PLA) and fibers of luffa cylindrical (LC) is studied. Preliminary results suggests promising mechanical properties. After reinforcement of irradiated LC fiber, the tensile strength and flexural strength of the virgin PLA matrix increases by 60% and 155% respectively. The E-modulus of the composites are also heightened with addition of irradiated fiber up to the limit of 1 Gy of irradiation dose and then decreases with higher dose of irradiation. Furthermore the tensile strength and flexural strength of the composites increases with incorporation of very low content of LC fiber up to 2wt% and decreases with higher loading of fibers (5wt% and 10wt%). Modulus of composites is enhanced with increase in wt of fiber content in the composites. Moreover beefore reinforcement the LC fibers are modified with Ca salts in order to explore the use of these composites in biomedical territory. Copyright © 2018 VBRI Press.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
