Effect of fluidic obstacles on flame acceleration and DDT process in a hydrogen-air mixture

Abstract

Using solid obstacles to accelerate the deflagration to detonation transition (DDT) process induces additional thrust loss, and fluidic obstacles can alleviate this problem to a certain extent. A detailed simulation is conducted to investigate the effects of multiple groups of fluidic obstacles on the flame acceleration and DDT process under different initial velocities and gas types. The results show that, initially, the propagation of reflected shock wave formed by jet impingement is opposite to the flame acceleration direction, thus increasing the initial jet velocity will hinder the flame acceleration. Later, the vortex structure and enhanced turbulence can promote flame acceleration. As the flame accelerates, the virtual blockage ratio of the fluidic obstacles decreases, and increasing initial jet velocity or using reactive jet gases both affect the virtual blockage ratio. Further, increasing initial jet velocity or using reactive jet gases can shorten the detonation initiation time and distance. Compared with solid obstacles, it is concluded that fluidic obstacles can achieve faster detonation initiation with a smaller blockage ratio. Overall, the detonation phenomena in this study are all triggered by hot spots formed by the interaction between reflected waves and distorted flame, but the formation of reflected waves varies.