Effect of finishing resins on mechanical and surface properties of cotton Denim fabrics

Abstract

The effect of two famous finishing resins; acrylic resin (Resacryl M), and Glyoxal resin (Resinol AM), applied by the same Pad Dry Cure Process PDC but according to various conditions, on the mechanical and surface properties of different cotton denim fabrics is studied in this paper. The treated samples which are characterized at two steps of the treatment process: before and after washing (BW and AW) were characterized in terms of surface morphology observations by SEM, geometrical roughness measurements with Kawabata Evaluation System KES, thickness and Dry crease recovery angle DCRA measurements, and mechanical testing properties. It resulted that Resinol AM improves dry crease recovery angle, but causes a loss of strength in the warp direction. Nevertheless, Resacryl M improves handless and preserves the mechanical properties fabric before and after washing. Studying the effect of resins type, concentrations and curing temperature on the mechanical behavior and surface of the cotton fabrics is very important in textile laundering, because it allows choosing the best finishing agents and conditions. Furthermore, the results of this report will be in workable data to predict the properties of the treated fabrics after resin finishing.