Abstract
The recently introduced microwave induced chemical etching (MICE) has been found to be a fast and effective etching technique for CR-39 detector. In the present work, the MICE technique was used to develop the neutron induced recoil tracks in CR-39 detectors. Special attention was paid in carrying out a systematic investigation to study the effect of etchant concentration and microwave power on the development of tracks and various track parameters. NaOH solution of different concentrations, viz. 3–8N was tested at 300, 450, 600 and 900W of microwave power. Temperature profiles for 200ml solution of each concentration were generated to maintain a fixed operating condition for all concentrations at each microwave power. The bulk etch rate was found to increase with the microwave power as well as with the etchant concentration. Empirical relations were established to relate the variation of bulk etch rate with microwave power and etchant concentration.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
