Abstract
AbstractFlax fiber‐reinforced polymer (FFRP) composites are emerging popular environmental‐friendly construction materials. However, their significant creep properties have been a major concern for using FFRP in load‐bearing structures. This article presents an investigation of the effect of environmental humidity on the creep behavior of the FFRP. Samples with flax fiber in 0°, 90°, and ± 45° were manufactured, respectively, by the vacuum infusion method. Accelerated creep tests were conducted on samples in different relative humidities (RH), and the results were analyzed by the time–temperature superposition principle (TTSP). It is found the creep development of samples with 0° and 90° fiber increases with the RH, and their 30‐year total strain in 97% RH is about 10 times higher than that in 11% RH. The samples with ±45° fiber are found not obviously sensitive to the humidity change. The scanning electron microscope (SEM) check indicates the change in the fiber–matrix interface and cracks between microfibrils in a fiber bundle is the main reason for the change of creep behavior in high humidity. This study may benefit the design of structures made of natural fiber‐reinforced polymer composites, especially for load‐bearing structures working in high‐humidity environments.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
