Abstract

The possibility of obtaining mixed air binder of high strength and water resistance by using active mineral additives has been considered. In this work, the gypsum binder has been replaced by a combination of hydrated lime with active additives - metakaolin and granulated slag. The ratio effect of the silica component to the binder on the compressive strength of the stone was studied. According to the results of X-ray phase analysis, the presence of tobermorite-like calcium hydrosilicates and the absence of hydrate lime phase were diagnosed in the stone. The influence of electrolyte additives - salts with three-charged cations - on stone hardening kinetics is shown. Increase in the compressive strength of 28-day-old stone from the modified mixed air binder by 5% with the introduction of 1% of the binder mass aluminum sulfate in the mixing water was established. The use of FeCl3 solution for mixing the modified mixed air binder leads to a decrease in the compressive strength of the 28-day-old stone. The mixing of the modified mixed air binder with Al2(SO4)3 solution reduces the time of setting.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call