Effect of different surface treatments on the bond strength of milled polyetheretherketone posts

Abstract

Statement of problemPolyetheretherketone (PEEK) can be used as a framework material for removable and fixed dental prostheses. However, information about the use of PEEK as a post-and-core restoration is scarce. PurposeThe purpose of this in vitro study was to evaluate the effect of different surface treatments on the push-out bond strength of milled polyetheretherketone posts to resin cement. Material and methodsSixty intact human maxillary central incisors were selected and endodontically treated, and standardized post spaces were prepared. Sixty PEEK posts were milled from a prefabricated PEEK blank by using a computer-aided design and computer-aided manufacturing (CAD-CAM) system and divided into 3 groups (n=15) according to the surface treatment: acid etching by using 98% sulfuric acid (AE); airborne-particle abrasion by using 50-μm Al2O3 (AA); nonthermal plasma treatment (NTP); in addition, PEEK posts (n=15) received no treatment (NT) and served as a control. All posts were bonded by using a self-adhesive resin cement. Three sections (coronal, middle, and apical) were obtained for each specimen. Push-out bond strength measurements (MPa) for each section were recorded by using a universal testing machine at a crosshead speed of 0.5 mm/min until failure occurred. The post-cement interfaces and failure modes were evaluated by using scanning electron microscopy. The data obtained were statistically analyzed by using 1-way ANOVA and the pair-wise Tukey (HSD) test to study the difference between group mean values (α=.05). ResultsThe overall mean ±standard deviation of the push-out bond strength was 11 ±2 MPa for AE group, 6 ±1 MPa for AA group, 5 ±1 MPa for NTP group, and 3 ±1 MPa for NT group. A statistically significant difference was found among all groups subjected to different surface treatments as indicated by the ANOVA test (P<.001). The pair-wise Tukey honestly significant difference (HSD) test showed a significant difference among the AE group and all groups (P<.001); however, no significant difference was observed between the AA and NTP groups (P>.05). Moreover, a significant difference was observed among all root sections (P<.001). ConclusionsSurface treatment of PEEK posts with 98% sulfuric acid for 60 seconds showed significantly higher bond strength values than those in other groups. The bond strength of PEEK posts to resin cement was significantly higher in the coronal section than that in other sections.