Effect of density on skin friction response of piles embedded in sand by simple shear interface tests

Abstract

Listen

Translate article

This study focuses on a particular phenomenon related to the reduction in sand–pile skin friction with initial relative density increment from medium to dense. Frictional behaviour of a sand–pile interface is simulated using a simple shear-type device capable of inducing a constant normal stiffness condition. Sand–pile interface sliding and soil deformation components are distinguished quantitatively. The effects of initial relative density of sand, initial normal load, and constant normal stiffness on the magnitude of the pile skin friction and shear displacement at failure are examined. Results indicate that the magnitude of the mobilized shear stress at failure relies significantly on the shear stress state with respect to the inflexion point on the volume change graph, which is equivalent to the position of the peak stress ratio. Good correlations exist between results of this study and field data of several heavily instrumented piles embedded in dense to very dense sands. The presented procedure is a useful framework for establishing more accurate skin friction calculation methodologies and “t-z” curve developments of axially loaded piles.