Abstract
The aim of this study was to investigate the utilization of recycled denim waste fibers (DWF) for reinforcing cementitious lightweight composite mortar (CLCM). The research focused on evaluating how the addition of DWF affected various aspects of CLCMs, such as flowability, fresh and hardened unit weight, porosity, water absorption, flexural strength, compressive strength, and load-deformation characteristics. Different proportions of fibers (0, 0.25, 0.50, 0.75, 1.00, 1.25, and 1.50 wt.% of cement) were incorporated into the CLCM. The results showed a slight decrease in both fresh and hardened unit weights compared to the reference. It was noted that the consistency of the mortars declined with the increasing addition of fibers. Additionally, the inclusion of any amount of fiber led to an enhancement in the mechanical properties of the lightweight mortars. Furthermore, the reference mortar exhibited less deformation under load, indicating its higher brittleness. Moreover, the study observed that the incorporation of DWFs had the ability to simultaneously improve both the ultimate load-bearing capacity and deformation of the mortars.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Innovations in Civil Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.