Effect of current density and polytetrafluoroethylene on the properties of micro‐arc oxide coating of pure aluminum

Abstract

AbstractMicro‐arc oxidation (MAO) is a surface treatment technology that enhances the surface properties of valves by creating a ceramic oxide layer on the metal surface. The goal of this study is to investigate the influence of current density on the properties of aluminum coatings during preparation and to improve the tribological properties of MAO/PTFE self‐lubricating films on the coating surface. The characterization of the coating was performed using X‐ray photoelectron spectroscopy, X‐ray diffraction, Raman spectra, and energy dispersive spectroscopy. The roughness, hardness, and elastic modulus of the coatings were tested using atomic force microscopy and nanoindentation. Tribological experiments were conducted to evaluate the tribological properties of the coatings. The experimental results show that the friction coefficient (COF), roughness, hardness, and elastic modulus of the MAO coating increase with the increase of current density. Additionally, the friction coefficient of the MAO composite coating significantly decreases after the addition of polytetrafluoroethylene (PTFE), improving the service life and application range of the metal coating. These findings are expected to promote the development of valve metal in various application fields.