Abstract
The effect of curing time on the physico-mechanical properties of the hardened Portland cement pastes containing limestone was studied. Five cement–limestone blends were prepared using 0%, 5%, 10%, 15%, and 20% of limestone as a partial substituent of Portland cement. The cement pastes were prepared using the standard water of consistency of 0.255, 0.255, 0.258, 0.261, and 0.263, respectively. The fresh pastes, thus produced, were moulded into 2×2×2-cm cubes. The pastes were first cured within the moulds at 100% relative humidity for 24 h, then the specimens were demoulded and cured under tap water for 3, 7, 14, and 28 days. At each hydration age, the hardened pastes were tested for bulk density, compressive strength, differential scanning calorimetery (DSC), and X-ray diffraction analysis (XRD). The results obtained were related as much as possible to the mechanical properties of the hardened cement pastes. The inclusion of limestone results in a notable improvement of the mechanical properties of the cement pastes containing limestone.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call