Effect of cube spacings on the three-dimensional flow structure over an array of wall-mounted cube

Abstract

The turbulent flow over an array of cubes mounted on one of the walls of a channel has been investigated using direct numerical simulation for cube spacing that ranges between 2.0 and 4.0. The Reynolds number based on the cube size and the average streamwise velocity is chosen to be 4000. The Navier–Stokes equations have been discretized using second-order spatial and temporal discretization schemes. The present investigation focuses on the flow structures and comprehensive characterization of the separated zones surrounding the cubes, as well as the associated wall-shear stress. A vortex shedding has been observed for the cube spacings of 3.0 and 4.0 without any evidence of vortex shedding for the lowest pitch of 2.0. For the two cases having pitches of 3.0 and 4.0, the presence of the unsteady separation bubbles at the cube's top and side surfaces results in a decrease in wall-shear stress. The quadrant analysis for the region close to the top surface of the cube is performed with the help of the joint probability density function, which reveals dual peaks within the recirculation bubble at the top surface of the cube for higher cube spacings. By conducting an invariant analysis of the Reynolds stress tensor for different cube spacings, we have explored the characteristic of Reynolds stress anisotropy due to the total fluctuations. The production of negative turbulent kinetic energy (TKE) is observed in different regions within the flow domain, among which the horseshoe vortex region for each cube spacing reveals its dominant presence. The physical mechanism responsible for the production of the negative TKE has also been attempted by decomposing the production term into two parts, namely, normal and shear components.