Abstract
AbstractThe crystalline structure of poly(L‐lactide) (PLLA) have been found to quite depend on the crystallization temperatures (Tcs), especially in the range of 100−120°C, which is usually used as the crystallization temperature for the industrial process of PLLA. The analysis of wide‐angle X‐ray diffraction and Fourier transformed infrared spectroscopy revealed that 110°C is a critical temperature for PLLA crystallization. At Tc < 110°C and Tc ≥ 110°C, the α′ and α crystals were mainly produced, respectively. Besides, the structural feature of the α′‐form was illustrated, and it was found that the α′‐form has the larger unit cell dimension than that of the α‐form. Moreover, the crystallization kinetics of the α′ and α crystals are different, resulting in the discontinuousness of the curves of spherulite radius growth rate (G) versus Tc and the half time in the melt‐crystallization (t1/2) versus Tc investigated by Polarized optical microscope and Differential scanning calorimetry, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.