Abstract
Harvesting the kinetic energy from the small dam’s spillway downstream flow in agricultural areas is interesting. On the other hand, a cross-flow turbine (CFT) is a unique impulse turbine because it works at a higher specific speed, which means this turbine works at a lower head and higher water flow rate. Thus, there is an opportunity to use a CFT to harvest the energy in the spillway. There are two possible scenarios: at the flat horizontal and the 30° slop flow. Several computational fluid dynamics (CFD) simulations were conducted to test the hypothesis. The simulations were performed with five variations of the ratio between the cross-sectional depth parameter of the spillway’s flow before approaching the turbine for each scenario. The total head in the present study case is 3.0 meters with 120 l/s of water discharge. The simulations used ANSYS® Fluent™ for 2D CFD simulation. The tests found that the CFT could attain 80.36% efficiency. Moreover, some water flows over the turbine at a higher rotational speed, leading to a significant loss in turbine performance, called potential loss. This finding indicates that the CFT could harvest the spillway’s flow kinetic energy when the flow is not too deep.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
