Abstract
Three kinds of L1 2-type Al 3Ti–Cr alloys, Al 67Ti 25Cr 8, Al 66Ti 24Cr 10 and Al 59Ti 26Cr 15, were prepared by induction melting followed by thermomechanical treatment. The oxidation behavior was investigated at 1273, 1373 and 1473 K in air. The oxidation resistance of the prepared alloys was excellent, however, there were some differences for each alloy. The isothermal oxidation resistance increased in the order of Al 59Ti 26Cr 15, Al 66Ti 24Cr 10 and Al 67Ti 25Cr 8, while the order became reversed in terms of the cyclic oxidation resistance. As more Al 2O 3 formed owing to the increased Al content in the alloy, the isothermal oxidation resistance increased, whereas the cyclic oxidation resistance decreased. The oxide scale was primarily composed of Al 2O 3, contaminated with Cr 2O 3 and TiO 2 that were present mainly at the lower part the oxide scale.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.