Abstract
Polymer dispersed liquid crystal (PDLC) lenses with a cell gap of 11 μm and 30 μm were made from a uniformly dispersed mixture of 40% prepolymer (NOA 65, Norland optical adhesive 65) and 60% E7 liquid crystal. PDLC’s mixture between two ITO coated glasses was polymerized by UV (ultraviolet) curing in the polymerization induced phase separation (PIPS) process. Decline of cell gap is a physical approach to improve the electrooptical properties, while cooling or doping of SiO2 nanoparticles is the microstructural approach to enhance the properties, because the electric field applied to the liquid crystal molecules in LC droplets is inversely proportional to the cell gap. A smaller cell gap significantly and effectively increases the electric field applied to PDLCD devices. The driving voltages and slope for the sample with a cell gap of 11 μm and 30 μm were drastically improved. The driving voltage and the slope of the linear region of PDLC lens with narrow cell gap of 11 μm were drastically enhanced compared to those of the samples with 30 μm cell gap and the cooled and doped samples. These improvements were due to the increase of the applied electric field. However, the response time and contrast ratio were deteriorated. It seems that this deterioration was caused by the sticking or fixing of liquid crystal molecules in LC (liquid crystal) droplets by the intensive electric field applied to the PDLC device.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
