Abstract
ABSTRACT PMN-PNN-PZT ceramics doped with sintering aids such as Li2CO3 and Na2CO3 were fabricated using two-stage calcination method and their structural and piezoelectric properties were investigated according to the 1st calcination temperature in order to develop ceramic composition for low loss and low temperature sintering multilayer piezoelectric actuator. The coulombite phase was successfully synthesized at 1050°C, resulting in increase of perovskite amount of PMN-PNN-PZT ceramics. At the calcination temperature of 1050°C and sintering temperature of 900°C, density, electromechanical coupling factor (kp), mechanical quality factor (Qm), dielectric constant (εr) and piezoelectric constant (d33) of PMN-PNN-PZT ceramics showed the optimum values of 7.885 g/cm3, 0.609, 1088, 1168 and 356 pC/N, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.