Effect of calcination temperature on microstructure and electrochemical performance of lithium-rich layered oxide cathode materials

Abstract

Lithium-rich layered oxide cathode materials (Li1.2Mn0.56Ni0.16Co0.08O2 (LLMO)) were synthesized via a two-step synthesis method involving co-precipitation and high-temperature calcination. The effects of calcination temperature on the cathode materials were studied in detail. Structural and morphological characterizations revealed that a well-crystallized layered structure was obtained at a higher calcination temperature. Electrochemical performance evaluation revealed that a cathode material obtained at a calcination temperature of 850°C delivered a high initial discharge capacity of 266.8mAhg−1 at a 0.1C rate and a capacity retention rate of 95.8% after 100 cycles as well as excellent rate capability. Another sample calcinated at 900°C exhibited good cycling stability. It is concluded that the structural stability and electrochemical performance of Li-rich layered oxide cathode materials were strongly dependent on calcination temperatures. The results suggest that a calcination temperature in a range of 850–900°C could promote electrochemical performance of this type of cathode materials.