Abstract
AbstractBACKGROUND: The aim of the work presented was to determine the morphology development and relevant change in fibre diameter of a binary polymer blend system during an electrospinning process. The size of the fibre diameter is one of the important factors determining the general properties of non‐woven mats formed from electrospun fibres.RESULTS: The morphology and diameter of electrospun polyacrylonitrile (PAN)/poly(methyl methacrylate) (PMMA) blends were investigated as a function of blend ratio using scanning electron microscopy. The diameter of the electrospun PAN/PMMA fibres decreased with increasing PMMA content up to 50 wt%, and then increased again with further increase of PMMA. After thermal treatment, the fibres shrank, and an irregularly shaped morphology was observed.CONCLUSION: The electrospinning of incompatible PAN/PMMA blends leads to a microphase‐separation morphology of fibres. A phase inversion occurs at a PMMA content of between 50 and 75 wt%. Due to the phase inversion, the fibre diameter shows a minimum value at the relevant composition. Copyright © 2008 Society of Chemical Industry
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
