Abstract
BackgroundAlthough biomimetic material has become increasingly popular in dental cosmetology nowadays, it remains unclear how it would affect the restored teeth during chewing. It is necessary to study the influence of biomimetic material on stress distribution in the restored teeth.MethodsEight three-dimensional finite element (FE) models were constructed and divided into two groups. Group 1 included the FE model of intact molar, and the FE models of inlay-restored molars fabricated from IPS e.max CAD, Lava Ultimate and biomimetic materials individually. Enamel was considered a homogeneous material. Group 2 included the FE models of intact molar and molars restored with inlays using IPS e.max CAD, Lava Ultimate and biomimetic materials individually, considering enamel as an inhomogeneous material.ResultsIn Group 1, compared with that in the intact molar, the maximum tensile stress (MTS) in the occlusal grooves decreased in the inlay-restored molars fabricated from IPS e.max CAD and was concentrated on the cavity floor at the buccal side in the inner dentin around inlay. When Lava Ultimate was selected, MTS decreased in the occlusal grooves and on the cavity floor but increased in the lateral walls. In the restored molar using biomimetic material, the MTS on the cavity floor was distributed more evenly than that in the molar using IPS e.max CAD, and no obvious changes were noted in the lateral walls. The same changes were observed in Group 2. No differences in the stress distribution pattern were noted among the FE models in Groups 1 and 2.ConclusionsMolars restored with inlays fabricated from biomimetic material exhibit a more uniform stress distribution in the dentin around restoration. The consideration of enamel as a homogeneous tissue is acceptable for analyzing the maximum principal stress distribution in the inlay-restored molar.
Highlights
For coronal damaged teeth with vital pulp, indirect restorations are becoming increasingly popular with the advantages of superior anatomical morphology and proximal contactHow to cite this article Zhu J, Luo D, Rong Q, Wang X. 2019
The maximum tensile stress (MTS) in enamel was concentrated in the occlusal grooves, and the MTS in coronal dentin beneath the enamel was concentrated at the buccal side under the oblique load (Fig. 2)
When the mandibular molar was restored using an inlay of the Class I cavity fabricated from IPS e.max CAD, the MTS in the occlusal grooves decreased with no obvious difference in the distribution pattern of maximum principle stress in the remnant enamel
Summary
For coronal damaged teeth with vital pulp, indirect restorations are becoming increasingly popular with the advantages of superior anatomical morphology and proximal contactHow to cite this article Zhu J, Luo D, Rong Q, Wang X. 2019. Group 1 included the FE model of intact molar, and the FE models of inlay-restored molars fabricated from IPS e.max CAD, Lava Ultimate and biomimetic materials individually. Group 2 included the FE models of intact molar and molars restored with inlays using IPS e.max CAD, Lava Ultimate and biomimetic materials individually, considering enamel as an inhomogeneous material. Results: In Group 1, compared with that in the intact molar, the maximum tensile stress (MTS) in the occlusal grooves decreased in the inlay-restored molars fabricated from IPS e.max CAD and was concentrated on the cavity floor at the buccal side in the inner dentin around inlay. In the restored molar using biomimetic material, the MTS on the cavity floor was distributed more evenly than that in the molar using IPS e.max CAD, and no obvious changes were noted in the lateral walls. The consideration of enamel as a homogeneous tissue is acceptable for analyzing the maximum principal stress distribution in the inlay-restored molar
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
