Abstract
We evaluated the possibility of sampling dissolved orthophosphate using the diffusive gradient in thin films (DGT) technique with a phosphate ion-imprinted polymer (PIP)-based adsorbent and assessed the effect of biofilm on the DGT measurement. The composition of biofilm formed on the DGT surface was analyzed, and the effect of biofouling on the diffusion coefficient of the analyte was investigated. The corrected diffusion coefficient for the biofouled DGT was estimated and used for the calculation of the DGT equation. PIP-binding gels had a higher adsorption affinity for orthophosphate than for the other anions, indicating its selectivity for orthophosphate. The concentrations predicted via DGT agreed well with the concentrations determined in the bulk solutions. Sampling of orthophosphate using PIP-DGT was consistent over a pH range of 3-9 and ionic strength range of 0.01-10 000 μM. Other P compounds cannot be measured using the PIP-DGT technique. The diffusion coefficient of the orthophosphate linearly decreased with increasing thickness of the biofilm. This sampling method performed predictably in freshwater when the biofilm was not formed or when value for the biofilm interference was reduced by using the corrected diffusion coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.