Effect of Bias Arc on Microstructure and Corrosion Resistance of Q235/304 Dissimilar-Steel-Welded Joints.

Abstract

To fully exploit the advantages of steel, the welding connection of dissimilar steels has been developed. In this work, the metallographic microstructures, elemental distributions, and electrochemical corrosion properties of the Q235 and 304 welds under different bias arcs were investigated. The arc bias caused the Q235-side heat-affected zone to widen, the microstructure consisted of ferrite and pearlite, and the ratio varied with decreasing distance from the fusion line. Elemental scans show that Cr and Ni concentration gradients exist near the fusion line. The 304-stainless-steel-side heat-affected zone was mainly composed of austenite grains, and the fusion zone was narrower but prone to cracking. Electrochemical tests revealed that 304 stainless steel had the best corrosion resistance, while Q235 had the worst corrosion resistance, and that the welded joints with an arc bias toward the 304 side had the best corrosion resistance. The samples' the passivation film which formed via electrochemical polarization had limited stability, but the over-passivation potential could be used as a reference for corrosion resistance. Overall, the arc bias and weld material properties significantly affected the microstructure and corrosion resistance of the joints.